Search
5-Day Training Course

Power System Analysis

Modeling and Understanding Power Systems
under Normal and Faulted Conditions

Course Overview

This training course covers the essential elements of power system analysis, both from a theoretical and practical viewpoint. Modeling of power system and simulation are essential for understanding the system operation and response. Studying faults analysis and model are essential to recommend the continuity of supplying power. Understanding types of faults and expecting their locations are important to avoid lack of supplying power. Types of buses, their rates and operating conditions are vital to keep your standard in supplying power. Many practical case studies will be covered to enhance understanding the power system operation and continuity of power flow. 

This popular training course will support you to develop, design, analyze, understand, simulate and figure out power system faults, load flow and how to model and simulate such systems in practices. Many practical case studies and problem will be presented to enable you how to detect the power system faults and to understand their effect of the power system operation. You will also develop skills in working well with such faults and analysis.

Course Objectives

By the end of this training course, you will be able to:

  • Perform three-phase power system calculations using phasor analysis and the per-unit system
  • Model key power system components, such as transmission lines, transformers, generators and loads
  • Understand power flow analysis and know the basics of operating a power system
  • Use symmetrical component theory and sequence networks to analyze short-circuit faults
  • Understand the equal-area criterion for transient stability

Who Should Attend

This training course is suitable to a wide range of professionals but will greatly benefit:

  • Engineers and supervisors in consultation and contracting track
  • Engineers who interested in design and installation of electrical power infra-structure
  • Supervisors engineers and other technical staff
  • Professionals involved with the generation, transmission, distribution, or utilization of electric power
  • Individuals working on integrating renewable energy resources into the existing power grid
  • Engineers and technicians new to the power industry

Course Curriculum

  • Introduction, Math Review and System Modeling
  • Power System Components, Modeling and Analysis
  • Faults Types analysis and modeling
  • Harmonic analysis
  • Voltage Drop Calculations and Cable Routings
  • Power Flow Analysis
  • Generation Control, Economic Dispatch and Unbalanced System Analysis
  • Symmetrical Components and Sequence Networks
  • Short Circuit Calculations and Transient Stability
  • ETAP Software for modeling and analysis

Certificates Awarded

Certificate of Completion

After successfully completing this training course, participants will be awarded The Energy Training Centre Certificate of Completion — a respected validation of their dedication to continuous learning and professional excellence. This certificate signifies that participants have gained the essential knowledge and skills required to make a measurable impact in their field.

  • Certificate of Completion will be provided to delegates who attend and complete the course
Upcoming Sessions
Abu Dhabi, UAE
Dubai, UAE
Dubai, UAE
Dubai, UAE
Didn’t Find Your Preferred Dates or Location?
Provide your preferred schedule or venue, and our team will get back to you with suitable options.

Related Courses

Frequently Asked Questions

Our training courses are conducted at partnered hotels located within the specified training areas. Please note that venue assignments may vary based on availability. For the most current information, do not hesitate to contact us at [email protected].

Yes, we do. We provide tailored training courses designed to meet the specific requirement of larger group of individuals. These customized training courses can be conducted both classroom and online formats, allowing you the flexibility to choose you preferred dates and duration.

Please contact us at [email protected] to discuss your group’s training needs, and we’ll work with you to create a personalized training course that aligns with your objectives.

Upon successful completion of the training course, you will receive The Energy Training Centre Certificate of Completion with corresponding learning hours.

Yes, special discounts are available upon request if you have more than one registrant for a course. For further information please email us at [email protected]

We offer two convenient payment options:

  • Bank Transfer – You can make payment via bank transfer. Once your registration is confirmed, you will receive an invoice with the banking details for the transfer. We would require you to supply a swift copy for us to confirm receipt of funds.
  • Payment Link – Alternatively, we provide a secure payment link that you can use to complete your payment after your registration has been confirmed.

Upon receiving your registration details, either via email at [email protected] or through our online registration form, we will send you the following by email within 24-48 hours of registration.

  • Joining Instructions
  • Invoice/receipt (where appropriate)

There are two convenient options to register for a training course:

  • Online Registration Form – Register for your desired training course by completing the online registration form available on our website. Simple click on the registration button or select your preferred dates and provide the requested information.
  • Email Registration – You can email us your intention to register at [email protected]. Our team will guide you through the registration process and provide assistance you may need.

We understand that time zones may be different between our Senior Consultants and our delegates. Our standard online course timings (11:00 AM to 4:00 PM, GMT+4 – Dubai, UAE) may be adjusted upon confirming the programme. Our team shall communicate between the confirmed registered delegates and suggest a suitable course timing for all.

Our standard course duration for our classroom programmes is 6 hours per day while our online session is 5 hours per day.

Our training courses span across diverse industries, encompassing sectors such as but not limited to:

  • Power & Utilities
  • Oil & Gas
  • Financial Institutions
  • Government and Regulatory bodies
  • Manufacturing & Production Industry

Our commitment lies in continuously refining and expanding our training course offerings to align with evolving industry landscapes. We encourage individuals to explore our website or engage with our dedicated support team for the latest information on available courses, ensuring access to the most pertinent and current educational resources.

Yes, The Energy Training Centre is certified and recognized by several prominent industry standards. Specifically, it holds certifications from ILM, Continuing Professional Development (CPD), and the Project Management Institute (PMI).

  • ILM (ID# 002398B) – This certification indicates that our training programmes meet high standards for leadership and management development, ensuring that they are designed to enhance participants’ skills in these critical areas.
  • Continuing Professional Development (CPD) – Our recognition by CPD reflects our commitment to providing educational opportunities that support ongoing professional growth and skill enhancement. This accreditation ensures that our training courses are relevant and effective for professionals seeking to advance their careers.
  • Project Management Institute (PMI) – Being recognized by PMI signifies that our training programmes align with industry best practices in project management. This certification assures participants that our offerings are in line with the standards required for effective project management and are valuable for those pursuing or maintaining PMI credentials.

These certifications underscore our dedication to providing high-quality, industry-relevant training that fosters professional growth and meets established standards. Additionally, we are actively pursuing further certifications and affiliations to enhance our offerings and ensure we remain at the forefront of industry best practices.

About Energy Training Centre

Energy Training Centre is a leading provider of professional development programs for the energy and public sectors. With over 15 years of experience, we have trained more than 50,000 professionals across the Middle East and beyond.

Our expert-led courses are designed to meet the evolving needs of modern organizations, combining theoretical knowledge with practical applications that deliver immediate value to your career and organization.

50K+
Professionals Trained
15+
Years of Experience
About Energy Training Centre

What Our Delegates Say

Real feedback from professionals who completed this course

View All

Ready to Advance Your Career?

Your growth starts here. Discover the complete portfolio of industry-leading training courses that can help you achieve your career goals.

View Course Finder
Search