Cable Joints, Terminations and Accessories

An Interactive 5 - Day Training Course

Cable Joints, Terminations and Accessories

Understanding Cable Faults and Sizing

Classroom Dates
Register
20 - 24 May 2024
Dubai
$5,950
Register
Register
23 - 27 Sep 2024
Dubai
$5,950
Register

This Cable Joints, Terminations and Accessories training course is designed to provide a valuable learning experience for the apprentice and a comprehensive refresher for the skilled employee. This training course provides students with information on how and why cable design and testing are necessary. Cable construction, principles of testing and evaluation of test results are covered in detail. Critical information on cable testing and fault location of medium-voltage cables are covered.

Institute of Electrical and Electronics Engineers (IEEE) standards are reviewed and discussed as well. Equipment covered includes Capacitive Discharge Equipment (Thumper), TDR (Time Domain Reflectometer), Hypot, Insulation Resistance Test set, Acoustic/ Magnetic Pulse Detection and Cable Route Tracing Equipment. There is also a strong emphasis on safety as well as application. Students put to practical use the information that they have learned by performing testing on medium-voltage cables and locating faults with state-of-the-art equipment.

The training course aims to help participants to develop the following critical objectives for power system:

  • A better understanding design of LV power cables
  • A better understanding of cable components
  • An improved capability in understanding control cable design 
  • A better understanding of failure modes and failure analysis for power cables 
  • A refreshed awareness of electrical safety concerns related to cable repair, testing and re-installations
  • A better understanding of electrical design Engineering
  • A better understanding of probe testing for high cable performance

This ETC training course will combine presentations with instructor-guided interactive discussions between participants relating to their individual interests. Practical exercises, video material and case studies aiming at stimulating these discussions and providing maximum benefit to the participants will support the formal presentation sessions. Above all, the course leader will make extensive use of case examples and case studies of issues in which he has been personally involved.

The participants’ organisation will have the following benefits: 

  • Better energy management
  • Cabling extend life
  • Better efficiency
  • Enhance maintenance and installation systems
  • Increase technical team awareness

The participants on this Energy Training Centre training course will have the following benefits: 

  • Increase personnel knowledge
  • Understanding latest maintenance methodologies
  • Understanding installation according the standards
  • Increase in Technical awareness
  • Enhance awareness of energy management

This training course is suitable for a wide range of professionals, but will be particularly beneficial to:

  • Electrical Design Engineers
  • Electrical Lead Engineers
  • Electrical Engineer Manager
  • Maintenance Manager
  • Electrical Supervisors

DAY ONE: INTRODUCTION TO POWER CABLE

  • Power cable introduction
  • Conductors
  • Insulation construction
  • Different type of insulation
  • Cable types
  • Cable carrying capacity
  • How to generate Datasheet for cables
  • Describe the different methods of cable installations

DAY TWO: POWER CABLE TESTING

  • Cables factory test
  • Cables site test
  • Cables test for maintenance
  • Equipment’s needed for power cable tests
  • IEC (International Electromechanical Commission) standard for cable test
  • Cable Voltage drop calculation
  • Type test, Routine test, Sample test
  • Insulation resistance test

DAY THREE: CABLE INSTALLATION AND TERMINATIONS AS PER EUROPEAN STANDARDS

  • Prepare cable for splicing utilizing hand tools, abrasives and solvents
  • Identify the main types of cables and accessories used for cable installation, jointing and termination
  • Sizing of cables and identifying the required design
  • What is cable termination
  • Cable termination steps and Cable joint methods
  • Review the different types of cable joints and terminations
  • Tools required for cable termination
  • Cables check after termination
  • Recognize the procedures and standards used for cables in a hazardous area

DAY FOUR: CABLE TESTING AND DESIGN INSTRUMENT

  • Digital voltmeter (DVM)
  • Megger (insulation test)
  • Frequency meter
  • Temperature probes/pyrometers
  • Ammeters, Power meters
  • Load banks
  • Digital hydrometers
  • Cable fault locators
  • Earth tester
  • Phase sequence
  • Cable laying and routing

DAY FIVE: THE IDENTIFICATION AND REPAIR OF PROBLEMS/FAILURES

  • Cable Fault Location
  • TDR For Cable Fault Detection
  • High Voltage Surge Generator Device
  • High Voltage Surge Generator Device with TDR
  • Cable Splicing Techniques
  • Heat Shrink Joints
  • Cable Stripping Tool
  • Crimping Tool
  • DC Dielectric Tester

We offer two main training formats to cater to different preferences and needs: 

  • Classroom Training Delivery – Our traditional classroom-based training courses provide a face-to-face learning experience with subject matter experts. You’ll benefit form in-person interactions, hands-on exercises, and a structured classroom environment.
  • Online Training Delivery – We also offer convenient live/online training courses that you can access from anywhere with a stable internet connection. These courses provided flexibility and allow you to learn anywhere, making them suitable for busy schedules or remote learning.

Yes, we do. We provide tailored training courses designed to meet the specific requirement of larger group of individuals. These customized training courses can be conducted both classroom and online formats, allowing you the flexibility to choose you preferred dates and duration.

Please contact us at inhouse@energytraining.ae to discuss your group’s training needs, and we’ll work with you to create a personalized training course that aligns with your objectives.

We value transparency and are happy to provide our instructor’s profiles upon request. If you would like to learn more about our instructor’s’ qualifications, expertise, and experiences, please email us at info@energytraining.ae.

We have multiple international training venues. You may find this through our website link: https://energytraining.ae/training-locations 

Our training courses are held at our partnered hotels within the city included within our training

The Energy Training Centre Certificate of Completion with corresponding learning hours who has successfully completed the training course.

Yes, we provide assistance by issuing a Letter of Invitation stating that you are confirmed to attend our training.

Yes, here are the following options we can offer to assist you:

  • Corporate Discount – We can extend our corporate discount to participants staying at the same hotel, if we have any. Please enquire about the availability of this discount when you register for the training course.
  • Nearby Hotel Suggestions – If you prefer other accommodations, we can provide a list of nearby hotels to suit your needs and budget.

Feel free to go through hotel booking platforms on the internet to find the most cost-effective for you.

No, we do not provide job placement services after the training course. However, we are confident that our training course equips you with the necessary tools and knowledge to enhance you career prospects and promote career growth. Our training course are designed to empower you with valuable skills and expertise to excel in your chosen field.

Classroom
  • Tuition fee for a 5-day training course
  • Provision of a world-class subject matter expert to deliver this training
  • Meeting at a hotel venue corresponding to your chosen session
  • Welcome food and drinks, AM / PM snack, and Lunch
  • Digital course materials (e-Tablet)
  • Course completion certificates
  • Designing and administration of Pre-& Post Course Assessments
  • Preparation of participant’s Performance and Appraisal Report, if required
  • Issuance of Letter of Invitation for delegates needed visa processing, if required
Online
  • Tuition fee for a 5-day online training course
  • Provision of a world-class subject matter expert to deliver this training through live/virtual delivery
  • An electronic copy of the training manual and relevant hand-outs
  • Issuance of The Energy Training Centre e-Certificate of Completion
  • Administration of Pre-& Post Workshop Assessments
  • Link access of online platform acceptable to both parties

Certainly, we do provide corporate rates tailored for organizations seeking to enrol multiple employees in our training programs. To facilitate this, we encourage you to make a formal request via email addressed to info@energytraining.ae. We’ll be delighted to discuss and offer a suitable arrangement for your corporate needs.

Yes, special discounts are available upon request if you have more than one registrant for a course. For further information please email us at info@energytraining.ae

We offer two convenient payment options:

  • Bank Transfer – You can make payment via bank transfer. Once your registration is confirmed, you will receive an invoice with the banking details for the transfer. We would require you to supply a swift copy for us to confirm receipt of funds.
  • Payment Link – Alternatively, we provide a secure payment link that you can use to complete your payment after your registration has been confirmed.

Upon receipt of your registration details sent via email at reg@energytraining.ae, we will send you the following by e-mail within 24-48 hours of registration.

  • Joining Instructions
  • Invoice/receipt (where appropriate)

 If you register online, you will receive an e-mail on the same day confirming your registration.

There are two convenient options to register for a training course:

  • Online Registration Form – Register for your desired training course by completing the online registration form available on our website. Simple click on the registration button or select your preferred dates and provide the requested information.
  • Email Registration – You can email us your intention to register at info@energytraining.ae. Our team will guide you through the registration process and provide assistance you may need.

Yes, we do allow registration transfers in the event that you are unable to attend the training course. To initiate a transfer, please send us an official email requesting the change. We’ll guide you through the transfer process and ensure a smooth transition of your registration to another eligible participant.

Our training course sessions are scheduled and posted on our website for your convenience. However, we understand that there may be specific requirement for your group. If you have a preferred venue and specific training dates in mind, please feel free to propose them to us by clicking on the button “Propose you preferred location & date” of your preferred training course.

Our course timings slightly vary between the cities we offer our training courses. Please let us know of your preferred course and session (dates/venue) through email at info@energytraining.ae. Alternatively, you may call/WhatsApp us at +971 50 746 0956.

We understand that time zones may be different between our Senior Consultants and our delegates. Our standard online course timings (11:00 AM to 4:00 PM, GMT+4 – Dubai, UAE) may be adjusted upon confirming the programme. Our team shall communicate between the confirmed registered delegates and suggested a suitable course timing for all.

Our standard course duration for our classroom programmes is 6 hours per day while our online session is 5 hours per day.

Our training programmes are designed to be concise yet comprehensive, focusing on professional development. The duration varies based on the specific course content and objectives – we normally offer programmes between 5 – 10 days. However, our emphasis lies in delivering interactive and engaging sessions that prioritize depth of learning within a condensed timeframe. This approach ensures participants acquire substantial knowledge and skills efficiently.

We have been assessed by TUV Rheinland Middle East FZE and comply with Quality Management System standards – ISO 9001:2015 and ISO 29993:2017, ensuring a commitment to quality and excellence in our operations and services.

Our training courses span across diverse industries, encompassing sectors such as but not limited to:

  • Power & Utilities
  • Oil & Gas
  • Financial Institutions
  • Government and Regulatory bodies
  • Manufacturing & Production Industry

Our commitment lies in continuously refining and expanding our training course offerings to align with evolving industry landscapes. We encourage individuals to explore our website or engage with our dedicated support team for the latest information on available courses, ensuring access to the most pertinent and current educational resources.

Yes, Energy Training Centre is an ILM Recognised Provider (ID# 002398B), authorized to register learners and offer training courses recognized by ILM. Participants seeking ILM Recognised Certification would need to complete an assessment post the ILM Recognised courses. ILM is a renowned provider of leadership and management qualifications, part of the City and Guilds Group. Additionally, our company is a CPD Certified Training Company, ensuring our commitment to continuous professional development standards.

Search